Bed Bumper
Next time you load the ATV into your pickup for a day of fun on the dusty trail, skip the needless scratches and dings to the truck bed with a Treebo Bed Bumper from DiscountRamps.com.
Lightweight and easy to put in place, the Bed Bumper is constructed of high-density polyethylene foam blocks measuring 10x9x12 inches that resist moisture and keep their shape even after absorbing the pressure of ATV wheels rolling forward. The connecting rod between the blocks adjusts up to 54 inches wide to fit the wheel base or bumper of most off-road vehicles and cleanup couldn’t be easier; just a quick spray of the garden hose does it.
Contact DiscountRamps.com (888) 651- 3431 or www.discountramps.com.
Can-Am Windshields
Ryfab & Coatings is now manufacturing windshields for the Can-Am Commander. These full solid glass, single-position windshields can be easily installed in about 20 minutes. The windshields come equipped with a hand-operated wiper and all hardware needed to install. They are available for the Sport and any other roof.
The windshields come as kits that can be shipped to you and you can take them to your local glass shop for installation. You will need 2- x 4-foot, approximately quarter-inch thick laminated glass. Ryfab & Coatings will provide you with a print to save you money on shipping and reduce the risk that your glass can be broken in transit.
Fits all models of Can-Am Commanders.
Contact Ryfab & Coatings (435)753-2655 or www.ryfab.com
Staun II Automatic Tire Deflators
Coyote Enterprises has introduced the all-new Staun II automatic tire deflators, engineered to improve traction on the sand, rocks and trail in a matter of minutes without losing valuable driving time.
Simply twist the American-made Staun II automatic tire deflator onto any standard metal or rubber valve stem and start driving while each tire deflates to the user-set tire pressure. As each tire deflates in motion, it eliminates the traditionally tedious and long waiting process for tires to air-down while you stand outside the vehicle. Each Staun II will automatically shut off when the air pressure drops to its adjusted setting.
The tool-less pressure adjustment allows for a wide range of pressure settings from 3 psi to 50 psi, while the hex adjustment cap and locking collar provide an option to firmly lock the setting. The Staun II also features reference marks to confidently keep track of minor air setting adjustments.
Staun II's manual-start pull ring option allows the user to easily release any additional air pressure buildup throughout the day or to activate air release when the current air pressure is close to the setting.
In addition to a shorter overall height that now fits in tighter locations, the all-new Staun II also features a Quick Chuck, allowing it to twist onto the valve stem much faster with fewer turns.
Staun II automatic tire deflators are made in the U.S.A. and retail for $71.76 with a lifetime warranty.
Contact Coyote Enterprises (949) 645-7733 or www.coyoteents.com.
Diver Down Snorkels
Designed for use on off-road vehicles, Diver Down snorkels from High Lifter Products have been engineered to provide maximum protection from water hazards that may be encountered on the trails.
High Lifter’s research and development team designed Diver Down snorkels to provide clean, dry air to the engine, belt housing and other off-road vehicle parts requiring venting. The snorkel provides an additional margin of protection in the event that the vehicle is inadvertently driven into water deeper than the OEM’s air intakes will tolerate. High-temperature silicone fittings at critical attachment points and the inclusion of differential bellows prevent water from entering the differential and vent tubes.
Each snorkel kit comes complete with all fittings, joints, pipe, grommets, bushings, a laser-cut riser bracket and complete step-by-step photo instructions for easy installation.
Diver Down snorkels are currently available for Polaris Ranger models with additional applications for other brands coming soon.
Contact High Lifter Products (800) 699-0947 or www.highlifter.com.
Maverick/Commander Doors
Blingstar Products has announced the release of its Maverick/Commander doors. These all-aluminum doors were designed to precisely fit both the Can-Am Maverick and Can-Am Commander side-by-sides. The doors are designed with a 1 3/8-inch 6061 tubing, which is stronger and more durable than the standard 1 1/4-inch tubing used on other doors.
The Blingstar Maverick/Commander doors have a multi-point mounting system and an integrated slam latch system. One of the easiest doors to install on the market, the doors are available in textured black and retail for $530.95.
Contact Blingstar (866) 412-5464 or www.blingstar.com.
Superclamp Tie Down System
From the makers of Superclamp products comes the revolutionary Superclamp ATV/UTV tie down system. No more struggling with various tangled tie downs or ratchet straps, crisscrossing from tie point to tie point, possibly damaging or scratching your ATV’s outer body panels when securing your ride.
With Superclamp’s ATV/UTV tie down system, your ATV/UTV is secured in seconds. This tie down system secures your ride by the tires at all four corners, the way the pros do it in the automotive industry, and eliminates the need for risky, unreliable tie down straps.
This system is easy to use, letting your ATV and its suspension float by clamping onto the tires and not compressing your suspension. The front chocks are quickly removable and have highly visible adjustable tire restraint bars. The front chocks have only inside guides, which let you easily align and place your ATV or UTV just right every time. With no guides to the outer side of the tire area, there is no loading interference and the smallest load footprint is achieved when placing your ATVs side by side.
Stylish, high-strength, high-tech injected aluminum rear clamping devices clamp on each rear tire, snuggly engaging and securing all four corners of your ATV/UTV. The rear clamping system easily slides onto a pre-installed deck bar and quickly slides against the rear tire. With one firm downward push of the pistol grip lockdown handle, you can be on your way in seconds. The Superclamp ATV/UTV tie down system is designed and made in North America.
Contact Superclamp (403) 203-2210 or www.superclamp.net.
Tough Country Bumper
After 15 years of manufacturing the toughest replacement truck bumpers on the market, Tough Country is now a pioneer in manufacturing heavy-duty bumper replacements for UTVs. Tough Country currently manufactures bumper replacements for the Polaris Ranger and RZR, Kawasaki Mule, John Deere Gator, Kubota and Bobcat.
All Tough Country UTV deluxe front bumpers come standard equipped with a two-inch heavy- duty pipe base, 12-gauge diamond plate, winch ready, shackle mounts, two-inch receiver, one-inch pipe light loops and black wrinkle powder coat, are winch ready and mount to factory holes.
Tough Country products can be purchased from any authorized dealer nationwide. To find a dealer near you, visit www.toughcountry.com.
Post Mount HID Lights
Xtreme OffRoad Lighting is the latest product segment for the Brite Lites brand of lighting items from Bluhm Enterprises. The new line of HID post mount lighting is designed to provide maximum light from compact HID enclosures in multiple sizes to fit almost any application where point light is required. Five different 35-watt HID designs are available in round shapes with different color accents. All feature polycarbonate housings and built-in ballast, 6,000 electrodes for pure white light and stainless hardware for a long life and impressive looks.
Xtreme OffRoad lights are all 12-volt DC battery operated and come with installation instructions and full online web support.
Two models of compact four-inch, 5,500-lumen post mount HIDs are available; three models of round HIDs are available at 7,800 lumens. Retail pricing starts at $124.
Contact Bluhm Enterprises (612) 812-5191 or www.britelites.net.
Stoneguard Ramp Kit
Triton has released its new AUT Stoneguard Ramp Kit. This dual-purpose kit makes it easy to side load an ATV in front of the fenders, then mounts on the front of the trailer as a stone guard.
The kit consists of two side ramps that create the distance needed to load and unload your ATV The ends of the ramp simply slip on the side rail so you can ride your ATV up and get ready to secure the machine. The ramps are lightweight and easy to maneuver.
Once your ATV is loaded, the ramps stack on top of each other and screw back into place, forming a stone guard that protects your toys from mud and debris.
On Triton’s AUT1282, AUT1482-1, AUT1482 and AUT1682 trailers, this kit allows for you to side load an ATV in the front and to rear load an ATV or UTV depending on the length of the machine. This provides increased versatility on selected 82-inch wide AUT trailers.
Contact Triton Trailers (262) 670-6514 or www.tritontrailers.com.
RZR XP 900 Performance Package
This sharp new performance package from Starting Line Products is sure to give your RZR XP 900 the edge you want. SLP has combined its performance slip-on muffler, high flow intake kit, clutch kit and Power Commander V with a pre-programmed SLP map.
Together these bolt-on parts optimize the performance of the XP 900 for up to three and a half lengths faster than stock in a drag race.
Contact Starting Line Products (208) 529-0244 or www.startinglineproducts.com.
Slasher Exhaust
This exhaust’s stainless steel construction includes an adjustable mount for easy installation. Its Bristol core high-end pillow packing and machined screw fasteners help ensure longer product life and the removable spark arrestor and optional quiet core insert make for a ride that can be as quiet as 96 decibels.
The Slasher exhaust is available starting at $249.99.
Contact MTA Distributing (800) 231-8529 or www.mtadistributing.com.
